|
Turbo Air Guide and Air Intake Products
|
Diesel Power Products makes the Turbo Air Guide, CoolHose Intakes, Exhaust Air Guides and Scotty Air Filter
products for your Truck!
Use the Selector below to find the TAG or air filter for your vehicle...
 Select:
|
|
|
NWTruckworks offers fantastic upgrades to the stock air intake systems for
Dodge and Ford diesel trucks that reduce EGT's and increase airflow, increase fuel mileage,
and best of all are easy to install. From the Air Filter to the Hoses to the Turbo Inlet,
we have the best solutions to optimize cool airflow to your engine, which increases efficiency!
|
|
Turbo Air Guide (TAG) The Turbo Air Guide (TAG) by Diesel Power Products
is a honeycombed venturi system that is placed in the inlet to the turbo from the air intake hose,
increases Turbo performance and installs easily and safely. The Turbo Air Guide straightens
air flow into a laminar flow and directs it straight into the compressor of the turbo,
resulting in more power, cleaner burning and better mileage.
The Turbo Air Guide
is constructed of stainless steel welded honeycomb material and fits many applications
for most turbo charged engines, gas or diesel.
Turbo Air Guide Technology
|
|
Scotty RAM Air Filter Systems. Scotty Ram air systems by Diesel Power Products for Dodge Cummins
trucks are unbeatable for the best air flow, best filtering, and reducing exhaust gas temperatures.
With true Cowl Induction, the Scotty systems are the best airflow enhancement
upgrades on the market, and replace the Dodge Ram stock air box with 3x the amount of filtering area. |
|
|
CoolHose:
The Cool Hose designed and built exclusively by Diesel Power Products is by far the best
aftermarket Turbo Inlet hose available! The Cool Hose connects the air intake system to the turbo charger
inlet for 2003-2007 3rd generation Dodge trucks equipped with 5.9L Cummins engines.
The Cool Hose features 4-layers of webbing for strength with a completely smooth interior
and longer radius bends than the factory hose. The Cool Hose also insulates your cool intake air
from heat transfer from under hood heat, keeping your intake air as cool as possible.
Benefits:
- 6- Layers of reinforced webbing with a stainless steel wire wrap for lasting strength and durability
- Silicone rubber construction
- Insulates intake air from underhood heat better than any other aftermarket tube
- Smooth bore hose with long sweep bends to minimize air flow restrictions and pressure drop
- 4-inch inside diameter throughout the hose
- Superior fit and finish
- Easy to install
- Dyno tested to produce more power than any other aftermarket intake tube. An additional 3.0 HP** (w/ stock fueling) or an additional 5.5 HP** (w/ power box set @ 80 HP) and increased torque throughout the RPM range
|
|
Cold Air Intake Tubes:
Cold air is picked up as the air passes under the vehicle.
Air enters PSM’s exclusive designed air inlet port located behind the bumper at the bottom of
the stock vertical air baffle. Cold air then flows into the bottom of the stock air box through
a smooth bore steel reinforced, fuel and heat resistant thermoplastic rubber duct. This kit retains
the stock air baffle which prevents hot underhood engine air from entering the air box.
Benefits:
- An economical cold air intake system for stock or modified single turbocharged Cummins engines with sufficient air flow for up to 450 horsepower.
- Engineered to provide maximum air density to the engine at all times, under all driving conditions, including heavy towing up steep grades for extended periods of time.
- Dyno and real-world acceleration tested to provide faster turbo spool up resulting in 15-20 horsepower and 35-60 ft-lbs torque increase between 1800-2500 RPM. Increases peak power 7-9 horsepower and 14-18 ft-lbs torque at 2800 RPM.
- Lowers EGTs by 40 degrees or more while heavy hauling and towing due to the cooler intake air entering the combustion chamber.
- Average 16 degrees lower EGTs during idle cool down than aftermarket "shield" type air box designs that take in hot underhood air.
|
|
Exhaust Air Guide (EAG): The Exhaust Air Guide (EAG) by Diesel Power Products is a honeycombed
venturi system that is placed in the exhaust outlet and installs easily and safely.
Similar to the Turbo Air Guide, the Exhaust Air Guide straightens air flow into a laminar flow and directs it
straight down the exhaust pipe, resulting in more power, cleaner burning and better mileage. |
Click Here for Gauges
|
DiPricol Gauges The DiPricol gauge clusters are designed
for your vehicle and install easily with all hardware and installation instructions included.
The mounts are color matched to your vehicle interior paint code. |
|
|
|
|
|
Backup Systems
Mufflers
